Audio sound at your Drive-in Event.

Setting up a drive-in event but how?
You want to hear the sound on the car radio during a drive-in meeting, wedding, concert, stand-up comedy or church service.
This is very easy with a low-power FM transmitter, max 50-30 watts because these transmitters can often be set to a power between 0,3 and 30-50 watts which are mostly  in the licence.
The audio sound is transmitted via the FM transmitter, audio is sent in real time to an FM frequency and can be heard on the car radios. This works without delay, in contrast to streaming the sound via a mobile phone for example. There is a delay in the image and sound, and will therefore never be synchronous.
Why should you choose an FM transmitter with a CE approval from the eu?
These transmitters meet the requirements set by your local telecom agency for an FM transmitter. 
Great sound and good quality this prevents disappointment afterwards. 
These permits are mandatory when setting up a Drive-in event:
Permit from the municipality for the location.
To use the FM transmitter, a license must be requested from the Media Authority.
This can be different in your country.
What kind of equipment do you need to set up a Drive-in set?
1CE approved low power FM transmitter
2 FM antenna and cable
3 RDS encoder (recommended)
3 FM audio processor (recommended)
Why an audio processor? The audio processor ensures an even audio level so that people in the car do not always have to turn the volume up or down during hard or soft passages in the film.
It also ensures that you do not overdrive the transmitter (the sound can be heavily distorted causing interference to neighboring frequencies).
Because an FM audio processor is indispensable, we recommend the 
Itel DPRO3 FM audio Processor
BW Broadcast DSPX Mini
Audessence ProCoder-2, other FM Sound Processors are also possible.
With an RDS encoder you can show the name of the event and other information on the screen of the radios. Also, many new car radios cannot tune into a signal if the correct RDS parameters are not sent.
What kind of antenna is needed, a broadband antenna or a tuned dipole?
If there is a fixed frequency you can use a tuned dipole.
Tuned Dipole
If there are different frequencies, it is best to use a broadband antenna.
Broadband FM Antenna
Finally, cable with the correct connectors is required:
Ecoflex Cable and Ecoflex Connector's. 
Here you will find an overview of the Drive-in equipment: Drive-in equipment
All sets are adjusted and set to frequency, provided with RDS text. The set is plug and play when it leaves the building.
Or are you going to rent the option, we rent various sets!
renting is only possible in Belgium and the Netherlands!
This is a professional rental set with a CE approved FM transmitter, antenna, cable, FM broadcast audio processor and an RDS encoder.
Do you want everything set up properly? It is also possible to have the set installed by us (at an additional cost.)
Drive-in Rental Set
Think carefully about your choices, and get well informed about the possibilities.
We can always think along with you and tailor a solution for specific wishes or budget.
If you have any questions after reading, please let us know!
Send us an email or call 0182-630406
Our drive-in