Axel Tech Tiger E5 Stereo/RDS encoder

TIGER E5  zijn 7 apparaten in 1, dankzij de krachtige digitale DSP technologie kan Tiger E5 de volgende functies vervullen: IP Audio Codec / Audio Omschakeling / Audio Limiter / Stereo Generator / RDS Encoder / MPX Omschakeling / FM Monitoring Systeem met geïntegreerde Tuner .
1.995,00 Excl. BTW
  Naar winkelwagen »
  Fout bij toevoegen
Levertijd: 7 Dagen

Tuner Option

Digital AES-EBU 192Khz MPX I/O


Axel Technology Tiger E5 Stereo - RDS encoder.


TIGER E5 is the device that can manage each kind of FM Transmitter Site and fulfills every custom requirement, from large national FM networks to local stations.
TIGER E5 is a 7 devices in 1, thanks to the powerful of the digital technology Tiger E5 can fulfill the following functions: IP Audio Codec / Audio Changeover / Audio Limiter / Stereo Generator / RDS Encoder / MPX Changeover / FM Monitoring System with integrated Tuner.
TIGER E5 can manage and decode MPX and RDS signals, receive IP Audio streaming signals, be connected and analyze Analog and Digital audio signals; thanks to the audio 4 channels Audio changeover and MPX Changeover it can handle every kind of received signal in a transmitting site.
Tiger E5 has a double IP streaming receiver and SD card player managed by a multimedia changeover.

TIGER E5 supports the most advanced RDS dynamic services, including TMC, ODA, IH, TDC, EWS, Radio Text and Radio Text plus. TIGER E5 allows to interface Radio Automation Systems to display song title, artist and other information, but always compliant to the CENELEC (Europe), NRSC (America) and UECP v7.05.
The built-in ITU BS412 multiplex power controller acts on the output to meet even the most strict European government regulations.
To control all these functions, a web interface has been created that can be used by any browers with any device from the smartphone to the laptop.
To satisfy the most demanding technicians TIGER E5 is SNMP v2c.

Tiger e3/e5 manages different kind of audio sources as Analog & Digital audio, IP-Audio, Backup-Player and MPX, thanks to the 4 channels audio changeover and 2 channel MPX Changeover.
The internal delay can be assigned to any source and allows the time alignment of two or more sources.
It is possible to use the internal audio player as a backup if all the external sources fail.
The internal limiter continuously monitors the sources audio levels, allowing the level managing and avoiding any overshoot generated by the satellite or IP-Audio MPEG decompression.
MPX inputs are decoded (L&R) and available to be used as sources for the Audio Changeover or MPX Changeover.
MPX Changeover features a UECP filter that allows the regeneration or filtering of any RDS service (PS, RT,RT ,IH,TMC,TA/TP), thus giving the user the chance to maintain, replace or filter any RDS parameter starting from the incoming RDS signal.
Changeover / FM Monitoring System with integrated Tuner.
TIGER E5 can manage and decode MPX and RDS signals, receive IP Audio streaming signals, receive and analyze Analog and Digital audio signals. Thanks to the 4 channels Audio changeover and MPX Changeover it can handle every kind of received signal in a transmitting site.



Easy Access


Tiger e3/e5 is fully configurable via WEB interface. Its web server is compatible with all the available web browsers (Chrome, Firefox, Edge, Opera, Safari…).
Tiger e3/e5 supports laptop, tablet and smartphones simplifying the browsing and setting of the device with its responsive-kind graphic interface that adapts the viewing mode according to the resolution and position (portrait/landscape) of the current viewing device.
The provided WiFi USB dongle creates a specific WiFi hotspot that enables the access to the device without the need of cabled or wireless net.
Tiger e3/e5 features 3 IPV4 and 3 IPV6 addresses to ensure concurrent connection for all the broadcasting and monitoring systems.

Easy Maintenance


Any first-time user can take advantage of Tiger e3/e5 simplified settings management. EASY CONFIGURATION FUNCTION quickly and easily enables the user to set the working mode, while QUICK RDS SETUP brings the mostly simple way to set the main RDS parameters.
IMPORT/EXPORT and PRESET MANAGER are available for a more advanced management of Tiger e3/e5.
These functions apply to the whole device configuration or only to some selectable modules (SYSTEM, RDS, MPX, AUDIO, MULTIMEDIA and TUNER).
Tiger e3/e5 uses a uSD card to create an automatic copy of all the device data whenever the user changes anything. If the device needs to be replaced or duplicated, the uSD card can be used to clone it.

Monitoring


Tiger e3/e5 features an endearing GUI (Graphical User Interface) that makes use of clear elements, rich of information. With a simple and straightforward selection of the available banners, it is possible to keep under control any function. The selected banners are always visible in any menu.
Tiger e3/e5 displays in both graphical and numerical format all the input and output levels as well as the internally generated signals. The visualization can be numerical, bar graph or time related.
In the RDS section, a specific area is available for on-air RDS group analysis (static and dynamic) to evaluate services balancing.
In the MPX section, spectrum analyzers display the MPX RDS input and output signals.
Tiger e3/e5 provides two independent listening paths for every internal audio source:
Local: using the headphone socket on front panel and the display to select the source
Remote: using the internal IP audio encoder that enables the remote audio receiving with different listening quality choices
The MPX decoder let the user listen to the decoded L&R audio for any of the MPX sources, input, output or internal.
Power Supply: 90-260 Vac / 47-63 Hz 15W

Analog Left & Right Input


Connector :Balanced on 2 XLR – EMI Suppressed
Input Impedance: 10Kohm
Nominal Input Level :(Sensitivity) Software Adjustable from -12dBu to 13,0 dBu (0,1dB step)
Nominal Input Level: -21,0dBu ÷ 24,0dBu
Max Input Level (clipping point): Selectable 15,0dBu or 24,0dBu
A/D conversion :CS4272, 24 bit / 48 Khz 
Input CMRR: >60dB (20Hz-20kHz)

Digital Input


Connector:Balanced on 1 XLR – EMI Suppressed
Input Impedance :110Ω
Standard :AES3
Audio Sample Rate: 32/44.1/48/96/192KHz
Adjustable Nominal Input Level: (Sensitivity) From -25,0dBFS to -0,2dBFS (0,1dB step)
Nominal Input Level: -36dBFS ÷ 0,0dBFS
Dynamic Range (Converter Values): 124dB (32KHz) – 126dB (44,1KHz) 126dB(48KHz) – 122dB (96KHz)
Resolution: 24 bit



MPX Input – MPX


Connector: Unbalanced on 2 BNC – EMI Suppressed
Input Impedance: 50K
Adjustable Nominal Input Level (Sensitivity): Software Adjustable -9dBm to 15,0dBm
Range of Level :-21,0dBu ÷ 24,0dBu
Max Input Level (clipping point) :Selectable 5,0dBu or 18,0dBu
A/D Conversion :Texas PCM4202

MPX Output - MPX


Connector: Unbalanced on 2 BNC – EMI Suppressed
Output Impedance: 10 Ω
Load Impedance :600 Ω or greater
Maximum Load Capacitance :5nF
D/A Conversion Texas :PCM 1796
Composite Output Level : -0,0dBm to 15,0 dBm (0,1 dBm step)
S/N : ≥ 85dB
THD : ≤ 0.01%
Separation: ≥ 70dB

Backup Player


Support On Micro SD CARD (max 64GB)
Supported formats :MP3, WAV
Supported Sample Rates :32,44.1,48,64,96 KHz

MPX & RDS Signal


Pilot Frequency :19 KHz /- 1Hz
Pilot Injection Adj :from -25,0dB a -15,5dB (0,1 dB step); 6 to 18% of total deviation
Pilot Stability: ±10 ppm (-10 to 55°C)
Pilot Distortion: 0,05% (typical)
Pilot Distortion: Noise 0,068% (on 100KHz band)
Composite out THD 0,01% (typical on the whole band)
Stereo Separation: >70 dB (typical on the whole band)
Linear Crosstalk: Main to Sub / Sub to Main:  >70 dB (minimum)
Digital filtering / band:  30 Hz to 15 kHz (-0,1dB), 17 kHz (-70 dB), 19 kHz (-100 dB)
57 kHz (RDS/RBDS) Protection:  Better than 51 dB
Pre-emphasis:  Off, 50uS, 75uS ( /-0,1dB)
Freq Response:  ±0,3 dB (30Hz-15kHz)
Operation: Mono / Stereo
MPX/RDS Output : Adj from -10,0 dB to 15,0 dB (0,1 dB step)
Signal/Noise Ratio:  ≥ 85 dB (on 100 kHz band)
Carrier Suppression: > 85 dB

System


GPIO Inputs/Outputs: 6 GPI / 4 GPO
Communication Port:  2xRS232, 3xUSB, 1xLAN
Synchronization: Ext(Pilot Mpx)/Int/ Auto
Synchronization Monitoring:Yes
RDS Level adjustment: Digitally controlled
Phase adjustment:  Yes, 0 ÷ 359.9°
Separate outputs for RDS MPX and for RDS only: Yes
Command to activate the RDS SCA: Yes
Side Chain Mode, Loop through mode, Bypass feature: Yes
RDS Subcarrier: 100% Digitally Generated Shape
CENELEC – EN50067 compliant: Yes
Accurate Clock Time (CT) Sync with Internet Connection:Yes
Remote TA actuation for Traffic Announcements:Yes
GPS module for automatic synchronization of the built-in Real Time Clock (RTC):Optional (USB External)
RDS decoder for rebroadcasting RDS Data :Yes
Firmware can be upgraded on the field :Yes
Front-panel Colour TFT Display: No (Tiger E3):Yes (Tiger E5)
Data may be entered on-site with Front-panel knob: No (Tiger E3) :Yes (Tiger E5)
Front Panel Leds: 40
Operating Temperature: 0°C ÷ 50°C

RDS Features


Group supported: All
Group Sequence: Configurable
PS: 8 DSN x MAIN 10 PSN
PI: 8 DSN x MAIN 10 PSN
PIN & PTY: RDS/RBDS
AF Method A: up to 1024 (64 lists)
AF Method B: up to 1024 (64 lists)
RT:Yes, 32 messages
RT rate adjustment: Group Sequence
RT for songs and content tagging :Yes
TP: Yes
TA:Control Command, Software, GPI
PTYN:Yes
EON :10 PSN
CT :Yes
TMC, EWS, IH, TDC :Yes
Free Format Groups (FFG):Yes
Open Data Application (ODA):Yes
PS Scrolling :Yes
Scrolling by characters, by word, auto centre, truncate long words: Yes (Characters – from 1 up to 8)

Communication


Connection with Automation Software :Yes
Network Connectivity: 4 TCP ports / 4 UDP / 1 SNMP
Configuration Software :Web Server, FTP
Password Protection: Yes
ASCII Protocol Configuration Messages
REST Command: Yes
Alert notifications on user-defined events via SNMP traps or E-mails: Yes
Embedded SNMP agent permitting active management tasks: Yes
Supported Network Protocols: HTTP, SMTP, UDP, TCP, NTP, FTP
UECP Protocol: EBU SPB490 Ver.7.05
PI Calculator: Yes
RDS 2.0 Ready: Yes

Dimensions


Dimensions (W; H; D) 485 x 44 x 240 mm
Weight < 3Kg