Sonifex Redbox RB-DA6G Distributie Versterker

Sonifex Redbox RB-DA6G 6 Way Stereo distributie versterker is een 1U rack-mount high performance 6 weg stereo distributie versterker voor het splitsen van een bron in een aantal verschillende uitgangen.Volume regelbaar per uitgang.
599,00 Excl. BTW
  Naar winkelwagen »
  Fout bij toevoegen
Levertijd: 3-5 Dagen

Sonifex Redbox RB-DA6G 6 Weg Stereo Distributie Versterker met Volume Regeling/Audio Versterker.


The RB-DA6 is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs.
The RB-DA6 has 1 stereo input and 6 stereo outputs. It can also be configured so that 1 mono input can be distributed to 12 outputs by use of a switch which is recessed on the front panel to prevent it being accidentally knocked.
The XLR-3 inputs and outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one output won't affect the others.
The left and right input gain controls (normalising) are pre-set potentiometers accessible through the front panel.
The output gain may be varied from -8dB to 18dB which is useful for normalising consumer and professional signals to give outputs of -15dBu and 0dBu respectively.

Technical Specification For RB-DA6G

Audio Specification
Maximum Input Level:28dBu
Maximum Output Level:28dBu
Frequency Response:20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
Gain Range:Adjustable 8dB loss to 18dB gain (12 adjustable pots)
Common Mode Rejection:>66dB typically
Input impedance:>20kΩ bridging
Output impedance:<50Ω
Distortion:0.01% THD @ 1kHz, ref 8dBu output
Noise:-88dB unity gain, ref 8dBu output
  
Connections
Inputs:2 x XLR 3 pin female (balanced, can be unbalanced)
Outputs:12 x XLR 3 pin male (balanced, can be unbalanced)
Mains Input:Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max
Fuse Rating:Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)
  
Equipment Type
RB-DA6G:6 way stereo distribution amplifier with output gain control
  
Physical Specification
Dimensions (Raw):48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)
Weight:Nett: 1.3kg  Gross: 1.9kg
Nett: 2.9lbs Gross: 4.2lbs