TC Electronics DB Max 5 Band Leveller

Audio Levellers
TC Electronic
De DB Max is een Leveler Maximizer en Audio Enhancement processor voor gebruik in digitale transmissie, verbindingen, webcast en radio STL toepassingen
3.899,00 Excl. BTW
  Naar winkelwagen »
  Fout bij toevoegen
Levertijd: 2-7 Dagen

TC Electronics DBMax - 5-Band Level Maximizer


DBMax is a Level Maximizer and Audio Enhancement processor for use in digital transmission, linking, webcast and radio STL applications.

High resolution and high sample rate processing prevents unwanted distortion and listening fatigue from being generated, artifacts often associated with comparable processors.

The 5-band section in DBMax can be combined with Automatic Gain Control, Dynamic and Static Stereo Enhancement, Dynamic and Static Eq and other tools for maximizing audio impact and creating a signature sound. Balanced and unbalanced AES/EBU I/O is standard, and outputs are always active. Sample rate conversion can be invoked when using digital inputs. Analog I/O is standard and outputs are always active.

The 24 bit converters are scaled in the analog domain, with scaling under preset control, to minimize noise and maximize headroom under all operating conditions. DBMax can be remotely controlled using GPI or RS485 serial inputs.

Main Features


Maintain maximum level and simultaneously eliminate overshoots.
 
  • Maximum efficiency: 5-band compression
  • Limiting: Sample accurate, distortion reduced Limiter
  • Multi Slope: Add gain at mid-levels without squashing the transients
Technical Specifications
Digital Inputs and Outputs
ConnectorsXLR (AES/EBU) RCA Phono (SPDIF)
FormatAES/EBU (24 bit), SPDIF (20 bit), EIAJ CP-340, IEC 958,
Output DitherHPF TPDF dither 8-24 bit
Word Clock InputBNC, 75 Ohm, 0.6 to 10 Vpp
Sample Rates32 kHz, 44.1 kHz, 48 kHz
Processing Delay0.5 ms @ 48 kHz
Frequency Response DIODC to 23.9 kHz ± 0.01dB @ 48kHz
Sample Rate Conversion
TypeAsychronous
Dynamic Range120 dB
THD N-106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS
Input Rate Range31 kHz to 49 kHz
Analog Inputs
ConnectorsXLR balanced (pin 2 hot)
Impedance20 kOhm (balanced)
Max. Input Level27 dBu (balanced)
Min Input Level (for 0dBFS)-4 dBu
A to D Conversion24 bit (1 bit, 128 times oversampling)
A to D Delay0.8 ms @ 48 kHz
Dynamic Range>103 dB (unweighted), >106 dB (A)
THD-95 dB (0.018%) @ 1 kHz -6 dBFS ([email protected] 18 dBu)
Frequency Response10 Hz to 20 kHz: 0/-0.2dB
Crosstalk<-80 dB, 10 Hz to 20 kHz typical -100 dB @ 1 kHz
Analog Outputs
ConnectorsXLR balanced (pin 2 hot)
By-passThrough relay
Impedance40 Ohm (balanced)
Max. Output Level26 dBu (balanced)
Full Scale Output Range-4 dBu to 26 dBu (balanced)
D to A Conversion24 bit (1 bit, 128 times oversampling)
D to A Delay0.57 ms @ 48 kHz
Dynamic Range>100 dB (unweighted), >104 dB (A)
THD-86 dB (0.005%) @ 1kHz, -6 dBFS (FS @ 18 dBu)
Frequency Response10 Hz to 20 kHz: 0/-0.5 dB
Crosstalk<-60 dB, 10 Hz to 20 kHz typical 90 dB @ 1kHz
EMC
Complies withEN 55103-1, EN 55103-2 FCC part 15, Class B CISPR 22, Class B
Safety
Certified toIEC 65, EN 60065, UL 1419 and CSA E65
Environment
Operation Temperature32° F to 122° F (0° C to 50° C)
Storage Temperature-22° F to 167° F (-30° C to 70° C)
HumidityMax. 90% non-condensing
PCMCIA Interface
ConnectorPC Card, 68 pin type 1 cards
StandardsPCMCIA 2.0, JEIDA 4.0
Card FormatSupports up to 2 MB SRAM
Control Interface
RS485/RS4225 Pin DIN
MIDIIn/Out/Through: 5 Pin DIN
GPI, Pedal, Fader1/4 inch phone jack
General
FinishAnodized aluminum face and top plate Plated and painted steel chassis
LCD56 x 128 dot graphic LCD-display
Dimensions19" x 1.75" x 8.2" (483 x 44 x 208 mm)
Weight5.2 lb. (2.35 kg)
Mains Voltage100 to 240 VAC, 50 to 60 Hz (auto-select)
Power Consumption<20 W
Backup Battery Life>10 years