BW Broadcast PA1000 V2 1 Kwatt FM Eindtrap

De BW Broadcast PA1000 V2 1Kw FM Eindtrap is een lichtgewicht FM Eindtrap met een regellbare output. Voor de kleine tot grote radio omroep.
Op aanvraag
  Naar winkelwagen »
  Fout bij toevoegen
Levertijd: Tijdelijk niet leverbaar

BW Broadcast PA1000 V2 1kW 1000 Watt FM Eindtrap.

This power amplifier is much more than just an amplifier. When you combine the highly efficient design, with the slide in power supply and gold clamp transistor technology, what you get is the perfect FM amplifier for your station. Many of the worlds largest radio stations have a PA1000 V2 on standby should the worst happen to their main transmitter. This simply comes down to the confidence that the PA1000 installs in its users. Quick to set up and reliable to the extreme, the PA1000 V2 has put many stations back on the air in times of crisis. 

Compact, lightweight and efficient, the PA1000 V2 has an adjustable output from 25 to 1100 watts. Internal harmonic filtering keeps your RF signal clean and compliant with all applicable CE, FCC and EU regulations. 

The PA1000 V2 includes our novel gold-clamp transistor technology, along with a slide in power supply, so that the most vulnerable components can be replaced in the field in minutes with no special tools. 

Our unique remote control app can be used on any smart device and allows you to access your BW Broadcast equipment. It can be used to monitor or change settings instantly from wherever you are. 

The graphical LCD controller eases the management of power, as well as monitoring of key system variables. The rear panel has a BNC connector for RF input and RF output is via an 7/16 socket. 

The PA1000 V2 is based on modern MOSFET devices that are simple, stable and efficient. High power fans draw fresh air through the transmitter's heatsink to keep the transistor and amplifier cool. Amplifiers are protected from damage by temperature control systems and antenna fault (VSWR) monitoring which react to faults by reducing the output power to a safe operating level, keeping you on air rather than shutting down completely. 

An RS232 control and monitor system can be managed from a standard terminal program or BW Broadcast's included Windows application. 

Need more power but want to keep the same lightweight and durable design? Then the PA1500 V2 may be for you.


Up to 85% Amplifier Efficiency
Uses BW Gold Change Clamping Technology
At 16kg - almost half the weight of other 1kW Amps!
MOSFET Power Design
Paralleled PSU for greater redundancy
SpecificationsDesign DataProtections
Frequency range87,5-108 MHz
RF connectorType N for RF input - type 7/16 for R.F. output
Impendance50 Ohm input and output power
Input Power20 W ALC setting from 100 W to 1.2 KW
Output Power1kW - ALC - SELF REDUNDANCY (if one of 4 x 250 W sub amplifiers breaks, it will automatically reduce the output power to a safe value while does not stop transmitting)
Overall efficiencyBetter Than 52%
Harmonic Suppression- 75% dB - AM residual as -75 dB
RF Probe- 60 dBC
Power SupplySwitch Mode (Double conversion voltage mains direct)(48 V / 20 A)
Type MOS-FET amplifier(4 x BLF 278)
DisplayMeter Forward power
 Reflected Power
 DC Supply Voltage
 Power Supply Temperature
 Power Amplifier Voltage
Power Supply200-240 V 20%
RF AmplifierRF Module Overtemperature 70 - Derates to 100W at 80 degrees C
Excessive Reflected Power(an antenna SWR value higher than 100 W send the equipement in protection, lowering automatically the output power)
Dimensions and WeightRack (2U) 89H x 448W mm. 500D mm.
Weight:15.7 Kg
Cooling Forced Air Cooling:4 Blowers 24V DC 80 x 80