Orban OPTIMOD 6300 – DAB+/HD Radio/Streaming Audio Processor DEMO
Deze Orban OPTIMOD 6300 is gespecialiseerd in het aansturen van digitale media zoals DAB, DAB+ , DRM, FMeXtra, HD-Radio en Netcasting (webstream). De vernieuwde ratio- en knee-controls maken de dit apparaat ook uitermate geschikt voor toepassingen waarbij een zeer subtiele audiocompressie gewenst is, zoals bijvoorbeeld studiomastering. Door de minimale delay (< 5 milliseconden) is de processor ook perfect inzetbaar in een radiostudio als hoofdtelefoon processor.
€ 4.895,00
€ 3.995,00
Excl. BTW
Levertijd: 3-5 Dagen
Orban Optimod 6300 - DAB-WEB-HD Digital Audio Processor DEMO
Demo unit in nieuw staat
De nieuwe PreCode-technologie van Orban manipuleert verschillende aspecten van de audio om artefacten veroorzaakt door codecs met een lage bitsnelheid te minimaliseren, waardoor een consistente luidheid en textuur van de ene bron naar de volgende wordt gegarandeerd. Er zijn verschillende fabrieksinstellingen die specifiek zijn afgestemd op codecs met een lage bitsnelheid. In geluid-voor-beeld-toepassingen temt de ingebouwde CBS Loudness Controller van de 6300 luidheidsvariaties van bron tot bron, waardoor consistentie wordt gegarandeerd en de tevredenheid van het publiek wordt gemaximaliseerd.
Beginnend met V2-software, biedt de 6300 ook een CBS Loudness Meter en ondersteuning voor Dolby Digital dialnorm-metadata, waardoor het perfect is voor het verwerken van ATSC-subkanalen terwijl Orban's 8585 Optimod-Surround het hoofdkanaal verwerkt. Het verwerkingsalgoritme van de 6300 is nu identiek aan dat van het 2.0-verwerkingskanaal van de 8585. Vanwege zijn veelzijdige signaalroutering kan de 6300 worden gebruikt als een gecombineerde studio-AGC, digitale radio/digitale televisie/netcast-processor en low-delay talent hoofdtelefoonprocessor. Elk van de drie uitgangen (stereo analoog x1 AES2 digitaal x2) kan elk van de volgende signalen uitzenden: stereoversterking, egalisatie en AGC zonder look-ahead piek n, en multibandverwerking (2-band of 5-band, inclusief AGC) N:
De 6300 vervangt de AGC in een Optimod bij de zender en biedt beschermingsbeperking voor de STL. Digitale uitgang #1 zendt de piekbegrensde uitgang van de AGC uit om de STL aan te drijven. De AGC is uitgeschakeld in de Optimod aan de zenderzijde. De AGC van de 6300 gebruikt dezelfde dual-band, window-gated matrixtechnologie als de AGC's in Orban's 2300, 5300, 8300, 8382, 8400, 8500, 9300 en 9400 Optimods . Het kan daarom nauwkeurig de AGC's in deze apparaten vervangen en kan helpen een volledig digitaal signaalpad door de hele faciliteit te behouden. Omdat de AGC van de 6300 geavanceerder is dan de AGC's in Orban's 2200, 8200 en 9200 Optimods, kan de 6300 de prestaties van deze oudere producten upgraden wanneer ze hun AGC's vervangen. Bovendien, omdat de 6300 presets ondersteunt die op afstand kunnen worden opgeroepen, kan automatisch worden gesynchroniseerd met de presets on-air aan een zenderzijde Optimod wanneer presets dagdeel zijn.
De multibandverwerking van de 6300 is dezelfde als die wordt gebruikt in het 2.0-verwerkingspad van de Optimod-Surround 8585 en zal identiek klinken. Bovendien is het vergelijkbaar met de verwerking die wordt gebruikt in het digitale radioverwerkingspad van de Optimod-FM 8500, terwijl de AGC's van de 6300 en 8500 in wezen identiek zijn. Om u te helpen het geluid van een 8585, 8400 of 8500 te evenaren, biedt de 6300 presets met dezelfde namen als die in deze processors. Als u een fabrieksvoorinstelling gebruikt op een 8400 of 8500 aan de zenderzijde, kunt u een voorinstelling met dezelfde naam in de 6300 oproepen om ervoor te zorgen dat het geluid hetzelfde blijft als wanneer u een 8400 of 8500 met zijn interne AGC. Digitale uitgang #2 zendt een piekbegrensd, multiband-verwerkt signaal uit om een netcast-encoder (zoals Orban's Opticodec-PC), een digitale radiozender of een digitale televisiezender aan te sturen. De analoge uitgang zendt een low-delay (~5 ms) multiband-verwerkt signaal uit zonder piekbegrenzing om talent-koptelefoons in de studio aan te sturen. Dit is met name handig in HD-radiofaciliteiten, waar off-air hoofdtelefoonbewaking vanwege vertraging onmogelijk is. De twee onafhankelijke stereo look-ahead-begrenzers van de 6300 kunnen worden geschakeld om "plat" of op een pre-emphasiscurve van 50us of 75us te werken. beschermt een vooraf benadrukt pad zoals een typische analoge microgolf STL. Omdat de look-ahead piekbeperkende technologie die in de 6300 wordt gebruikt optimaal presteert met "platte" transmissiekanalen (zoals bijna alle digitale kanalen), kan de 6300 geen loudness-verwerking bieden voor pre- benadrukte radiozenders.
Gebruik voor deze toepassing een van Orban's Optimod-FM-processors. Gebruik Optimod-TV 8382 voor analoge televisie met FM-geluidsdrager(s). Beginnend met V2-software bevat de 6300 presets voor analoge televisie met FM-geluidsdragers met nadruk op 50us of 75us. Hiermee kunt u een 6300 aanschaffen voor uw analoge televisie zender en blijf de 6300 gebruiken wanneer u overstapt op digitale transmissie.
Performance
Specifications apply for measurements from analog left/right input to analog left/right output.
Frequency Response (Bypass Mode): Depending on settings, is flat or follows standard 50µs or 75µs preemphasis curve ±0.10 dB, 20 Hz-20 kHz. (At 32 kHz input sample rate, the passband is reduced to approximately 14.7 kHz.) Analog left/right output and digital output can be user-configured for flat or pre-emphasized output.
Noise: Output noise floor will depend upon how much gain the processor is set for (Limit Drive, AGC Drive, Two-Band Drive, and/or Multiband Drive), gating level, equalization, noise reduction, etc. The dynamic range of the A/D Converter, which has a specified overload-to-noise ratio of 110 dB, primarily governs it. The dynamic range of the digital signal processing is 144 dB.
Total System Distortion (de-emphasized, 100% modulation): <0.01% THD, 20 Hz-1 kHz, rising to <0.05% at 20 kHz. <0.02% SMPTE IM Distortion.
Polarity (Two-Band and Bypass Modes): Absolute polarity maintained. Positive-going signal on input will result in positive-going signal on output.
Processing Resolution: Internal processing has 24 bit (fixed point) or higher resolution; uses four 150 MHz Motorola DSP56367 DSP chips. All equalizers and crossovers use double-precision arithmetic to achieve mastering-quality processing.
Internal Processing Sample Rate: 48 kHz. Although this rate is not currently fashionable, we believe that it is optimum, pro-audio marketing spin to the contrary. No bias-controlled listening tests (i.e., double-blind with matched levels) have demonstrated that humans can hear the difference between 48 kHz and higher sample rates. Meanwhile, the double-precision equalizers and crossover filters used throughout the 6300 produce at least 6 dB lower noise and nonlinear distortion than they would at 96 kHz.
Delay: The minimum available input/output delay is approximately 23 ms, as determined by the advanced "look-ahead" processing algorithms employed. This can be padded to exactly one frame of 24, 25, 29.97, or 30 frames/second video and can also be adjusted in 1 ms intervals up to 60 ms. The input/output delay to the Headphone Monitor output is approximately 5 ms. (This output has no peak limiting applied to it.)
Operating mode: Stereo or dual-mono. In dual-mono mode, both processing channels have the same subjective adjustments (as determined by the active preset) but are otherwise independent, making this mode appropriate for dual-language processing.
Analog Audio Input
Configuration: Stereo / Dual-Mono.
Impedance: >10kΩ load impedance, electronically balanced.
Nominal Input Level: Software adjustable from -4.0 to 13.0 dBu (VU).
Maximum Input Level: 27 dBu.
Connectors: Two XLR-type, female, EMI-suppressed. Pin 1 chassis ground, Pins 2 ( ) and 3 electronically balanced, floating and symmetrical.
A/D Conversion: 24 bit 128x oversampled delta sigma converter with linear-phase anti-aliasing filter.
Filtering: RFI filtered, with high-pass filter at 0.15 Hz (-3 dB).
Analog Audio Output
Configuration: Stereo / Dual-Mono.
Source Impedance: 50Ω, electronically balanced and floating.
Load Impedance: 600Ω or greater, balanced or unbalanced. Termination not required or recommended.
Output Level (100% peak modulation): Adjustable from -6 dBu to 24 dBu peak, into 600Ω or greater load, software-adjustable.
Signal-to-Noise: >= 90 dB unweighted (Bypass mode, de-emphasized, 20 Hz-15 kHz bandwidth, referenced to 100% modulation).
L/R Crosstalk: <= -70 dB, 20 Hz-15 kHz.
Distortion: <= 0.01% THD (Bypass mode, de-emphasized) 20 Hz-15 kHz bandwidth.
Connectors: Two XLR-type, male, EMI-suppressed. Pin 1 chassis ground, Pins 2 ( ) and 3 electronically balanced, floating and symmetrical.
D/A Conversion: 24 bit 128x oversampled.
Filtering: RFI filtered.
Digital Audio Input
Configuration: Stereo or Two-Channel (dual-mono) per AES3 standard, 24 bit resolution, software selection of stereo or dual-mono. Unit can detect Stereo or Two-Channel status bits and switch modes appropriately.
Sampling Rate: 32, 44.1, 48, 88.2, or 96 kHz, automatically selected.
Connector: XLR-type, female, EMI-suppressed. Pin 1 chassis ground, pins 2 and 3 transformer balanced and floating, 110Ω impedance.
Input Reference Level: Variable within the range of -30 dBFS to -10 dBFS.
J.17 Deemphasis: Software-selectable.
Filtering: RFI filtered.
Digital Audio Output
Configuration: Stereo or Two-Channel per AES3 standard. Output configured in software as flat or pre-emphasized to the chosen processing preemphasis (50µs or 75µs), with or without J.17 preemphasis.
Sample Rate: Internal free running at 32, 44.1, 48, 88.1 or 96 kHz, selected in software. Can be synced at 32, 44.1, 48, 88.1 or 96 kHz to 1x wordclock or AES11id applied to the Sync input or to AES3 or AES11 signals applied to the AES3 digital input.. (Passband is limited to approximately 14.7 kHz when using 32 kHz output sample rate.)
Word Length: Software selected for 24, 20, 18, 16 or 14-bit resolution. First-order highpass noise-shaped dither can be optionally added, Dither level automatically adjusted appropriately for the word length.
Connector: XLR-type, male, EMI-suppressed. Pin 1 chassis ground, pins 2 and 3 transformer balanced and floating, 110Ω impedance.
Output Level (100% peak modulation): -20.0 to 0.0 dBFS software controlled.
Filtering: RFI filtered.
Sync Input
Configuration: Can accept wordclock or AES11id (75Ω) sync, selectable in software.
Connector: Female BNC.
Termination: Unterminated. For wordclock, use an external 75Ω terminator if the 6300 is the last item in the chain. For AES11id, always use a 75Ω terminator.
Remote Computer Interface
Configuration: TCP/IP protocol via direct serial cable connect, modem, or Ethernet interface. Modem is not supplied.
Serial Port: 115 kbps RS-232 port dB-9 male, EMI-suppressed.
Ethernet Port: 100 Mbit / sec on RJ45 female connector.
Remote Control (GPI) Interface
Configuration: Eight (8) inputs, opto-isolated and floating.
Voltage: 6-15V AC or DC, momentary or continuous. 9VDC provided to facilitate use with contact closure.
Connector: DB-25 male, EMI-suppressed.
Control: User-programmable for any eight of user presets, factory presets, bypass, test tone, stereo or mono modes, analog input, digital input.
Filtering: RFI filtered.
Power
Voltage: 100-264 VAC, 50-60 Hz, 40 VA.
Connector: IEC, EMI-suppressed. Detachable 3-wire power cord supplied.
Grounding: Circuit ground is independent of chassis ground, and can be isolated or connected with a rear panel switch.
Safety Standards: ETL listed to UL standards, CE marked.
Environmental
Operating Temperature: 32º to 122º F / 0º to 50º C for all operating voltage ranges.
Humidity: 0-95% RH, non-condensing.
Dimensions (W x H x D): 19" x 1.75 " x 14.25" / 48.3 cm x 4.4 cm x 36.2 cm. 1RU.
Humidity: 0-95% RH, non-condensing.
RFI / EMI: Tested according to Cenelec procedures. FCC Part 15 Class A device.
Shipping Weight & Dimensions: 18 lbs / 8.2 kg - 23" x 23" x 6"
Specifications apply for measurements from analog left/right input to analog left/right output.
Frequency Response (Bypass Mode): Depending on settings, is flat or follows standard 50µs or 75µs preemphasis curve ±0.10 dB, 20 Hz-20 kHz. (At 32 kHz input sample rate, the passband is reduced to approximately 14.7 kHz.) Analog left/right output and digital output can be user-configured for flat or pre-emphasized output.
Noise: Output noise floor will depend upon how much gain the processor is set for (Limit Drive, AGC Drive, Two-Band Drive, and/or Multiband Drive), gating level, equalization, noise reduction, etc. The dynamic range of the A/D Converter, which has a specified overload-to-noise ratio of 110 dB, primarily governs it. The dynamic range of the digital signal processing is 144 dB.
Total System Distortion (de-emphasized, 100% modulation): <0.01% THD, 20 Hz-1 kHz, rising to <0.05% at 20 kHz. <0.02% SMPTE IM Distortion.
Polarity (Two-Band and Bypass Modes): Absolute polarity maintained. Positive-going signal on input will result in positive-going signal on output.
Processing Resolution: Internal processing has 24 bit (fixed point) or higher resolution; uses four 150 MHz Motorola DSP56367 DSP chips. All equalizers and crossovers use double-precision arithmetic to achieve mastering-quality processing.
Internal Processing Sample Rate: 48 kHz. Although this rate is not currently fashionable, we believe that it is optimum, pro-audio marketing spin to the contrary. No bias-controlled listening tests (i.e., double-blind with matched levels) have demonstrated that humans can hear the difference between 48 kHz and higher sample rates. Meanwhile, the double-precision equalizers and crossover filters used throughout the 6300 produce at least 6 dB lower noise and nonlinear distortion than they would at 96 kHz.
Delay: The minimum available input/output delay is approximately 23 ms, as determined by the advanced "look-ahead" processing algorithms employed. This can be padded to exactly one frame of 24, 25, 29.97, or 30 frames/second video and can also be adjusted in 1 ms intervals up to 60 ms. The input/output delay to the Headphone Monitor output is approximately 5 ms. (This output has no peak limiting applied to it.)
Operating mode: Stereo or dual-mono. In dual-mono mode, both processing channels have the same subjective adjustments (as determined by the active preset) but are otherwise independent, making this mode appropriate for dual-language processing.
Analog Audio Input
Configuration: Stereo / Dual-Mono.
Impedance: >10kΩ load impedance, electronically balanced.
Nominal Input Level: Software adjustable from -4.0 to 13.0 dBu (VU).
Maximum Input Level: 27 dBu.
Connectors: Two XLR-type, female, EMI-suppressed. Pin 1 chassis ground, Pins 2 ( ) and 3 electronically balanced, floating and symmetrical.
A/D Conversion: 24 bit 128x oversampled delta sigma converter with linear-phase anti-aliasing filter.
Filtering: RFI filtered, with high-pass filter at 0.15 Hz (-3 dB).
Analog Audio Output
Configuration: Stereo / Dual-Mono.
Source Impedance: 50Ω, electronically balanced and floating.
Load Impedance: 600Ω or greater, balanced or unbalanced. Termination not required or recommended.
Output Level (100% peak modulation): Adjustable from -6 dBu to 24 dBu peak, into 600Ω or greater load, software-adjustable.
Signal-to-Noise: >= 90 dB unweighted (Bypass mode, de-emphasized, 20 Hz-15 kHz bandwidth, referenced to 100% modulation).
L/R Crosstalk: <= -70 dB, 20 Hz-15 kHz.
Distortion: <= 0.01% THD (Bypass mode, de-emphasized) 20 Hz-15 kHz bandwidth.
Connectors: Two XLR-type, male, EMI-suppressed. Pin 1 chassis ground, Pins 2 ( ) and 3 electronically balanced, floating and symmetrical.
D/A Conversion: 24 bit 128x oversampled.
Filtering: RFI filtered.
Digital Audio Input
Configuration: Stereo or Two-Channel (dual-mono) per AES3 standard, 24 bit resolution, software selection of stereo or dual-mono. Unit can detect Stereo or Two-Channel status bits and switch modes appropriately.
Sampling Rate: 32, 44.1, 48, 88.2, or 96 kHz, automatically selected.
Connector: XLR-type, female, EMI-suppressed. Pin 1 chassis ground, pins 2 and 3 transformer balanced and floating, 110Ω impedance.
Input Reference Level: Variable within the range of -30 dBFS to -10 dBFS.
J.17 Deemphasis: Software-selectable.
Filtering: RFI filtered.
Digital Audio Output
Configuration: Stereo or Two-Channel per AES3 standard. Output configured in software as flat or pre-emphasized to the chosen processing preemphasis (50µs or 75µs), with or without J.17 preemphasis.
Sample Rate: Internal free running at 32, 44.1, 48, 88.1 or 96 kHz, selected in software. Can be synced at 32, 44.1, 48, 88.1 or 96 kHz to 1x wordclock or AES11id applied to the Sync input or to AES3 or AES11 signals applied to the AES3 digital input.. (Passband is limited to approximately 14.7 kHz when using 32 kHz output sample rate.)
Word Length: Software selected for 24, 20, 18, 16 or 14-bit resolution. First-order highpass noise-shaped dither can be optionally added, Dither level automatically adjusted appropriately for the word length.
Connector: XLR-type, male, EMI-suppressed. Pin 1 chassis ground, pins 2 and 3 transformer balanced and floating, 110Ω impedance.
Output Level (100% peak modulation): -20.0 to 0.0 dBFS software controlled.
Filtering: RFI filtered.
Sync Input
Configuration: Can accept wordclock or AES11id (75Ω) sync, selectable in software.
Connector: Female BNC.
Termination: Unterminated. For wordclock, use an external 75Ω terminator if the 6300 is the last item in the chain. For AES11id, always use a 75Ω terminator.
Remote Computer Interface
Configuration: TCP/IP protocol via direct serial cable connect, modem, or Ethernet interface. Modem is not supplied.
Serial Port: 115 kbps RS-232 port dB-9 male, EMI-suppressed.
Ethernet Port: 100 Mbit / sec on RJ45 female connector.
Remote Control (GPI) Interface
Configuration: Eight (8) inputs, opto-isolated and floating.
Voltage: 6-15V AC or DC, momentary or continuous. 9VDC provided to facilitate use with contact closure.
Connector: DB-25 male, EMI-suppressed.
Control: User-programmable for any eight of user presets, factory presets, bypass, test tone, stereo or mono modes, analog input, digital input.
Filtering: RFI filtered.
Power
Voltage: 100-264 VAC, 50-60 Hz, 40 VA.
Connector: IEC, EMI-suppressed. Detachable 3-wire power cord supplied.
Grounding: Circuit ground is independent of chassis ground, and can be isolated or connected with a rear panel switch.
Safety Standards: ETL listed to UL standards, CE marked.
Environmental
Operating Temperature: 32º to 122º F / 0º to 50º C for all operating voltage ranges.
Humidity: 0-95% RH, non-condensing.
Dimensions (W x H x D): 19" x 1.75 " x 14.25" / 48.3 cm x 4.4 cm x 36.2 cm. 1RU.
Humidity: 0-95% RH, non-condensing.
RFI / EMI: Tested according to Cenelec procedures. FCC Part 15 Class A device.
Shipping Weight & Dimensions: 18 lbs / 8.2 kg - 23" x 23" x 6"
