Inovonics DAVID III Model 718 I FM Broadcast Processor

FM Audio Processors
Inovonics
De Inovonics 718 David III Broadcast processor heeft  uitgebreide multiband audio processing met een digitale stereo-generator. Een prima geluid in 5 minuten!
Op aanvraag
  Naar winkelwagen »
  Fout bij toevoegen
Levertijd: Uit Productie

Inovonics Model 718 - 'DAVID-III' FM Processor/Generator

THIRD-GENERATION "DAVID" PROCESSING... THE 'SIMPLE SOLUTION' FM AIRCHAIN

Inovonics introduced the first DAVID (as in David vs. Goliath) in 1992 to meet the more
basic needs of FM broadcasters. In 1995, an improved DAVID-II brought increased functionality and more competitive performance.
This expanded the international reputation of the DAVID series to broadcast markets of all sizes.The multiband DAVID-III has been designed from the ground up to compete with today's aggressive processing systems at a fraction of their cost. The Inovonics DAVID family of FM processor / generators has established a benchmark for simplicity and value the world over. The DAVID-III elevates this "giant killer" tradition to a higher, bolder level.

""DAVID-III"" combines comprehensive multiband audio processing with a digital-synthesis stereo generator for unexcelled performance and great value. Pulse-width-modulation (PWM) techniques ensure rock-stable operation and a very competitive, yet effortless sound. Density and equalization adjustments allow the broadcaster to tailor the 'signature' of the on-air sound. Proprietary PIPP* final limiting and an adjustable composite clipper guarantee full carrier modulation for any program audio source or characteristic.

Features
  • Third-generation DAVID processing
  • FM processor/generator
  • Easy to install and use without the need for external test equipment
  • 3-band feed forward Pulse-Width-Modulation (PWM)
  • Gated-AGC (Automatic Gain Control)
  • PIPP (Polarity Independent Peak Processing) limiter and a built-in adjustable composite clipper
  • Digital synthesis of the multiplex baseband signal
Specifications

FREQUENCY RESPONSE
±0.5dB, 20Hz-15kHz

STEREO SEPARATION
>55dB, 50Hz-15kHz (typically 60-70dB)

NOISE
Better than 70dB below 100% modulation in decoded L/R audio. Individual digital noise components above 54kHz are –70dB or better.

DISTORTION
<0.5%THD in baseband and subcarrier at 95% modulation with PIPP* limiter defeated; <1.5% at any level of modulation with PIPP* limiter engaged.

CROSSTALK (M/S or S/M)
Nonlinear crosstalk is better than –50dB, 50Hz-15kHz. Linear crosstalk (through processing and filters) is better than –40dB.

PRE-EMPHASIS
75μs or 50μs selected by internal jumpers.

PIPP* LIMITER 
(*Polarity Independent Peak Processing) Proprietary circuitry assures full carrier deviation by program audio regardless of signal asymmetry. The limiter may be defeated with a front-panel switch.

LOW-PASS FILTERING
The 7-pole, phase-corrected, active-elliptic LPF includes proprietary overshoot compensation.

COMPOSITE CLIPPER
Baseband clipping may be adjusted between 0dB and 3dB. Clipping is performed prior to pilot injection.

STEREO PILOT
19kHz, ±1Hz. Pilot is adjustable between 6% and 12% relative to 100% modulation.

DIGITAL SYNTHESIS SAMPLING RATE
608kHz (16X subcarrier oversampling)

COMPOSITE OUTPUT
The 75-ohm, unbalanced BNC output is variable between 1V p-p and 10V p-p with reference to 100% carrier modulation.

POWER REQUIREMENTS
105-130VAC and 210-260VAC; 50/60Hz; 20W.

SIZE AND SHIPPING WEIGHT
23” x 16” x 2” (2U); 8 lbs
584mm x 406mm x 51mm ; 3.6 kg 
Inovonics 718 David III Datasheet