Sigmacom Broadcast Ether MPX NG IP STL
Sigmacom EtherMPX NG is een directe vervanging voor uw analoge STL verbinding Ether MPX is een IP-STL-systeem (encoder en decoder) van Sigmacom Broadcast, ontworpen om 1 op 1 MPX signaal te vervoeren (met RDS of L / R-signaal) van de studio naar zender via een TCP / IP-netwerk (bedraad of draadloos).
€ 1.995,00
€ 1.870,00
Excl. BTW
Levertijd: 7-14 Dagen
Sigmacom Broadcast EtherMPX NG | MPX over IP STL , Studio naar Zender link/ Audio Verbinding.
EtherMPX is een IP- STL -systeem ontwikkeld om real time MPX te vervoeren met RDS of L / R signaal van studio naar zender , via een TCP / IP-netwerk .
Een betaalbare directe vervanging van uw analoge STL , met hogere prestaties !
Professionele IP STLS met compromisloze kwaliteit, geen modulatie overschrijdingen , geen hoorbare latency voor live- on-air monitoring en tijd nauwkeurigheid voor SFN toepassingen. Deze toepassingen vereisen een hoge betrouwbaarheid en dedicated hardware , in tegenstelling tot gewone computer -systemen , en dit is speciaal ontworpen voor gebruik in ruwe omgevingen, zoals in de bergen of andere afgelegen plekken waar de zenders zich bevinden.
EtherMPX is een IP- STL precies ontworpen voor deze principes . Hij heeft het voordeel om analoge of digitale MPX met 2,5 ms latency , en analoge of digitale L / R discrete kanalen via ongecomprimeerd lineair PCM 24bit 48kHz ( L / R ) of 24bit 192kHz ( MPX -modus )te versturen . State-of- the-art componenten voor de analoge sectie bieden high-end kwaliteit , met DC- gekoppelde ingangen en uitgangen .
Met EtherMPX en de flexibiliteit van IP-overdracht , kunt u nu zelf complexe configuraties samenstellen die nooit konden worden gerealiseerd met traditionele STL verbindingen. Stuur een onbeperkt aantal EtherMPX decoders aan met slechts een encoder in multicast-modus!
Synchroniseer alle zenders met de mogelijkheid van SFN EtherMPX , zonder dat GPS ontvangers en antennes daarbij nodig zijn!
Belangrijkste feiten
Opties:
• OPT-001: SFN-werking
• OPT-002: lage latentie (vermindering van latentie tot 2,5 ms in MPX-modus)
• OPT-004: 2e ETH-poort voor SNMP-beheer
• OPT-006: Ingebouwde GNSS-ontvanger
• OPT-007: dubbele voeding
GENERAL Model name EtherMPX NG
Dimensions 19” 1U chassis
Power supply 230VAC 50Hz, 12W per device
Operating temp -20 to +60 Celsius
Transport protocol Proprietary UDP Unicast or Multicast based on RFC2365 and IGMPv2 (RFC2236). AES67 compatible in specific modes.
QoS management IETF RFC2474 compliant
Audio compression None (Linear PCM) in Legacy, HD or AES67 Proprietary lossless / lossy in other modes
Audio sample rate 8 – 192kHz input for Digital L/R input 48kHz internal for Analog L/R input 128–192kHz input for Digital MPX input 192kHz internal for Analog MPX input
Audio latency L/R mode: 10.0–125.0mS, user adjustable MPX mode: 5.0–62.5mS, user adjustable Low Latency Option: Down to 5.0mS (for L/R), 2.5mS (for MPX) Network usage L/R mode: 0.59 - 2.44 Mbit/s selectable MPX mode: 1.11 - 4.89 Mbit/s selectable
Audio monitor Stereo ¼” Female jack in front panel
User interface / control Locally: Front panel UI (LCD + rotary knob) Remotely: EtherMPX NMS NG Software
Input SYNC for SFN (Option #1) 10MHz sine or square, 0dBm typical, and 1PPS square TTL 3.3V 10kOhm typical
Output SYNC for SFN (Option #1 with #6) 10MHz TTL 3.3V, +14dBm @ 50Ohm, and 1 PPS TTL 3.3V @ 50 Ohm
GPS RF In (Option #6) -165dBm for 30sec to lock GPS + GLONASS <100ppb holdover for 12 hours
ETH port (for audio) RJ45 female, IEEE802.3, 10/100Mbps MDIX
DECODER
Output name Port A
Output type Digital electrical interface
Connector XLR-3 male
Impedance 110 Ohm balanced - transformer isolated
Supported formats AES3, IEC60958, S/PDIF Audio sample rate 32 – 192 kHz (128 –192kHz for D-MPX)
Audio sample resolution Up to 24 bit
Output name Port B
Output type Analog electrical interface - 2 outputs, 1input Connectors 2 x XLR-3 male (balanced R, L/MPX) output 1 x BNC female (unbalanced MPX only) output 1 x BNC female (unbalanced MPX only) AUX in **XLR is DC coupled, BNCs are AC coupled Impedance 100 Ohm
DAC resolution 24 bit
DAC sample rate 48kHz for L/R input, 192kHz for A-MPX
DAC THD+N -108dB (0.0004%) at 48kHz L/R output -96dB (0.0015% at 192kHz MPX output
DAC Dynamic range Max 129 dB (A-weighting) at 48 or 192kHz
Channel separation 124 dB typical
Reference output 4.37Vpp (+6dBu) for 0 dBFS
Input BW @ 48kHz SR -0.1dB @ 21.8 kHz
Input BW @ 192kHz SR -0.1dB @ 87.2 kHz
Encoder
Input name Port A
Input type Digital electrical interface
Connector XLR-3 female
Impedance 110 Ohm balanced - transformer isolated
Supported formats AES3, IEC60958, S/PDIF
Maximum data rate 12.3 Mbit/s typical
Audio sample rate 32 – 192 kHz (174–192kHz for D-MPX)
Audio resolution Up to 24 bit
Input name Port B
Input type Analog electrical interface - 3 inputs
Connectors 2 x XLR-3 female (balanced R, L/MPX) input 1 x BNC female (unbalanced MPX only) input **XLR is DC coupled, BNC is AC coupled
Impedance 1 kOhm
ADC resolution 24 bit
ADC sample rate 48kHz for L/R input, 192kHz for A-MPX
ADC THD+N -106dB (0.0005%)
ADC Dynamic range 121 dB (no weighting)
Channel separation 135 dB typical
Reference input 3.47Vpp (+4dBu) for 0 dBFS
Input BW @ 48kHz SR -0.1dB @ 20 kHz
Input BW @ 192kHz SR -0.1dB @ 80 kHz
Dimensions 19” 1U chassis
Power supply 230VAC 50Hz, 12W per device
Operating temp -20 to +60 Celsius
Transport protocol Proprietary UDP Unicast or Multicast based on RFC2365 and IGMPv2 (RFC2236). AES67 compatible in specific modes.
QoS management IETF RFC2474 compliant
Audio compression None (Linear PCM) in Legacy, HD or AES67 Proprietary lossless / lossy in other modes
Audio sample rate 8 – 192kHz input for Digital L/R input 48kHz internal for Analog L/R input 128–192kHz input for Digital MPX input 192kHz internal for Analog MPX input
Audio latency L/R mode: 10.0–125.0mS, user adjustable MPX mode: 5.0–62.5mS, user adjustable Low Latency Option: Down to 5.0mS (for L/R), 2.5mS (for MPX) Network usage L/R mode: 0.59 - 2.44 Mbit/s selectable MPX mode: 1.11 - 4.89 Mbit/s selectable
Audio monitor Stereo ¼” Female jack in front panel
User interface / control Locally: Front panel UI (LCD + rotary knob) Remotely: EtherMPX NMS NG Software
Input SYNC for SFN (Option #1) 10MHz sine or square, 0dBm typical, and 1PPS square TTL 3.3V 10kOhm typical
Output SYNC for SFN (Option #1 with #6) 10MHz TTL 3.3V, +14dBm @ 50Ohm, and 1 PPS TTL 3.3V @ 50 Ohm
GPS RF In (Option #6) -165dBm for 30sec to lock GPS + GLONASS <100ppb holdover for 12 hours
ETH port (for audio) RJ45 female, IEEE802.3, 10/100Mbps MDIX
DECODER
Output name Port A
Output type Digital electrical interface
Connector XLR-3 male
Impedance 110 Ohm balanced - transformer isolated
Supported formats AES3, IEC60958, S/PDIF Audio sample rate 32 – 192 kHz (128 –192kHz for D-MPX)
Audio sample resolution Up to 24 bit
Output name Port B
Output type Analog electrical interface - 2 outputs, 1input Connectors 2 x XLR-3 male (balanced R, L/MPX) output 1 x BNC female (unbalanced MPX only) output 1 x BNC female (unbalanced MPX only) AUX in **XLR is DC coupled, BNCs are AC coupled Impedance 100 Ohm
DAC resolution 24 bit
DAC sample rate 48kHz for L/R input, 192kHz for A-MPX
DAC THD+N -108dB (0.0004%) at 48kHz L/R output -96dB (0.0015% at 192kHz MPX output
DAC Dynamic range Max 129 dB (A-weighting) at 48 or 192kHz
Channel separation 124 dB typical
Reference output 4.37Vpp (+6dBu) for 0 dBFS
Input BW @ 48kHz SR -0.1dB @ 21.8 kHz
Input BW @ 192kHz SR -0.1dB @ 87.2 kHz
Encoder
Input name Port A
Input type Digital electrical interface
Connector XLR-3 female
Impedance 110 Ohm balanced - transformer isolated
Supported formats AES3, IEC60958, S/PDIF
Maximum data rate 12.3 Mbit/s typical
Audio sample rate 32 – 192 kHz (174–192kHz for D-MPX)
Audio resolution Up to 24 bit
Input name Port B
Input type Analog electrical interface - 3 inputs
Connectors 2 x XLR-3 female (balanced R, L/MPX) input 1 x BNC female (unbalanced MPX only) input **XLR is DC coupled, BNC is AC coupled
Impedance 1 kOhm
ADC resolution 24 bit
ADC sample rate 48kHz for L/R input, 192kHz for A-MPX
ADC THD+N -106dB (0.0005%)
ADC Dynamic range 121 dB (no weighting)
Channel separation 135 dB typical
Reference input 3.47Vpp (+4dBu) for 0 dBFS
Input BW @ 48kHz SR -0.1dB @ 20 kHz
Input BW @ 192kHz SR -0.1dB @ 80 kHz