TC Electronic FireworX Effect Processor
Audio | Effect Processors
TC Electronic
De FireworX is de meest radicale klinkende Multi-Effects processor die je ooit hebt gehoord en een echte uitdaging voor je fantasie. Neem wat je nodig hebt van het brede palet van interne effecten, de in het hart van de FireworX zal u muziek mooier doen klinken.
€ 799,00
Excl. BTW
Levertijd: 2-7 Dagen
C Electronic FireworX Studio Multi Effects Processor w/WC.
If you've been searching to find an alternative in effects processing, FireworX is the answer! It represents a very special perspective in signal processing, allowing you to express yourself and take control far beyond the capabilities of your average cookie cutter effects machine.
FireworX features an 8x8 position routing grid. Simply place the algorithms anywhere on the grid and they will be automatically "wired" together in parallel and serial, depending on the position.
FireworX uses a dynamic resource allocation system that allows you to monitor how much DSP power you are using. You can keep adding algorithms to the routing grid until you hit the DSP power limit without affecting the FX quality.
When the desired combination of algorithms are chosen in the Routing grid, all thinkable editing tools are available, including a unique modifier matrix allowing you to twist parameters dynamically in a way you have never experienced before.
Effects
- Expander/Gate
- Soft Compressor
- Hard Compressor/Limiter
- Resonance Filter · Bandpass Filter
- Phaser · Resonator · Resochord Filter
- Formant Filter
- Drive Distortion
- Cruncher Distortion
- Vocoder
- Ring Modulator
- Curve Generator Synth
- Chaos Generator Synth
- Noise Generator Synth
- Single Voice Pitch shift
- Dual Voice Pitch shift
- Classic Chorus
- Advanced Chorus
- Classic Flanger
- Advanced Flanger
- Stereo Delay
- Dual mono Delay
- Dual Three Tap Delay
- One Tap Delay
- Six Tap Delay
- Reverse Delay
- Reverb
- Advanced Reverb
- Simple Tremolo
- Advanced Tremolo
- Simple Panner
- Surround Panner
- Stereo Enhancer
- 5 band Parametric EQ
- 4 band modifiable parametric EQ
- Feedback Send
- Feedback Return
- Insert Send
- Insert Return
Technical Specifications
Digital Inputs and Outputs |
Connectors | ![]() | XLR (AES/EBU) RCA Phono (SPDIF) Optical (Toslink, ADAT) |
![]() |
Formats | ![]() | AES/EBU (24 bit) SPDIF (20 bit) EIAJ CP-340 IEC 958 EIAJ Optical (Toslink) ADAT Lite pipe |
![]() |
Output Dither | ![]() | HPF TPDF dither 8-24 bit |
![]() |
Word Clock Input | ![]() | RCA Phono, 75 ohm, 0.6 to 10 Vpp |
![]() |
Sample Rates | ![]() | 44.1 kHz, 48 kHz |
![]() |
Processing Delay | ![]() | 0.2 ms @ 48 kHz |
![]() |
Frequency Response DIO | ![]() | 20 Hz to 23,9 kHz 0,01/-0,1 dB @ 48 kHz |
![]() |
Analog Inputs |
Connectors | ![]() | XLR balanced (pin 2 hot) |
![]() |
Impedance | ![]() | 20 kOhm |
![]() |
Max. Input Level | ![]() | 22 dBu (balanced) |
![]() |
Min. Input Level | ![]() | -10 dBu |
![]() |
Sensitivity | ![]() | @ 12 dB headroom: -22 dBu to 10 dBu |
![]() |
A to D Conversion | ![]() | 24 bit (1 bit, 128 times oversampling) |
![]() |
A to D Delay | ![]() | 0.8 ms @ 48 kHz |
![]() |
Dynamic Range | ![]() | >103 dB (unweighted), >106 dB (A) |
![]() |
THD | ![]() | -95dB (0,0018%) @ 1kHz -6dBFS (FS @ 16dBu) |
![]() |
Frequency Response | ![]() | 10 Hz to 20 kHz: 0/-0.2 dB |
![]() |
Crosstalk | ![]() | <-80 dB, 10 Hz to 20 kHz, typical -100 dB @ 1 kHz |
![]() |
Analog Outputs |
Connectors | ![]() | XLR balanced (pin 2 hot) |
![]() |
Impedance | ![]() | 100 Ohm (active transformer) |
![]() |
Max. Output Level | ![]() | 22 dBu (balanced) |
![]() |
Full Scale Output Range | ![]() | -10 dBu to 22 dBu |
![]() |
D to A Conversion | ![]() | 24 bit (1 bit, 128 times oversampling) |
![]() |
D to A Delay | ![]() | 0.5 ms @ 48 kHz |
![]() |
Dynamic Range | ![]() | >100 dB (unweighted), >104 dB (A) |
![]() |
THD | ![]() | -86 dB (0.005%) @ 1 kHz, -6 dBFS (FS @ 16 dBu) |
![]() |
Frequency Response | ![]() | 10 Hz to 20 kHz: 0/-0.5 dB |
![]() |
Crosstalk | ![]() | <-60 dB, 10 Hz to 20 kHz typical -90 dB @ 1 kHz |
![]() |
EMC |
Complies with | ![]() | EN 55103-1, EN 55103-2 and Class B limits of FCC rules, part 15 |
![]() |
Safety |
Certified to | ![]() | IEC 65, EN 60065, UL 1419 and CSA E65 |
![]() |
Environment |
Operating Temperature | ![]() | 32 °F to 122 °F (0 °C to 50 °C) |
![]() |
Storage Temperature | ![]() | -22 °F to 167 °F (-30 °C to 70 °C) |
![]() |
Humidity | ![]() | Max. 90 % non-condensing |
![]() |
PCMCIA Interface |
Connector | ![]() | PC Card, 68 pin type 1 cards |
![]() |
Standards | ![]() | PCMCIA 2.0, JEIDA 4.0 |
![]() |
Card Format | ![]() | Supports up to 2 MB SRAM |
![]() |
Control Interface |
MIDI | ![]() | In/Out/Through: 5 Pin DIN |
![]() |
GPI, Pedal, Fader | ![]() | 1/4" phone jack |
![]() |
General Finish | ![]() | Anodized aluminum front, Plated and painted steel chassis |
![]() |
LCD |
Dimensions | ![]() | 56 x 128 dot graphic LCD-display 19" x 1.75" x 8.2" (483 x 44 x 208 mm) |
![]() |
Weight | ![]() | 5.2 lb. (2.35 kg) |
![]() |
Mains Voltage | ![]() | 100 to 240 VAC, 50 to 60 Hz (auto-select) |
![]() |
Power Consumption | ![]() | <20 W |
![]() |
Backup Battery Life | ![]() | >10 years |