AVT MAGIC AE1 DAB+ Go Audio Encoder

The MAGIC AE1 DAB+  Go is a compact 1/2 x 19" x 1 U DAB Audio Encoder without fan. It is the perfect solution for smaller Service Providers.
On request
  To cart »
  Error while adding to cart
Ships in: 7-14 Days

EDI Go Upgrade

FhG MUXENC Go Upgrade


MAGIC AE1 DAB + Go Audio Encoder.


The high quality and professional DSP-based hardware audio encoder MAGIC AE1 DAB+ Go is realized as a fanless ½ x 19‘‘ device. Both analogue and digital audio interfaces are available for the input of the audio signal. The supplied Windows software allows the configuration of up to 40 systems.

In addition to the usual PAD feed via the multiplexer - which supports all standardized services - the PAD services Dynamic Label via FTP or UECP and Slideshow via FTP can also be fed in locally on the device. In addition, a traffic announcement (TA) can be triggered very easily via UECP or a GPI contact. Finally, the Audio Encoder allows direct transmission of the program type (PTy) like Rock, Pop etc. via UECP.

The transmission is monitored via the supplied Windows PC software or SNMP. Alternatively, an alarm can also be output via a GPO contact.

FEATURES
  • DSP based Hardware Encoder
  • MPEG4 HE-AAC v2 (ETSI TS 102 563)
  • Audio via IP to Ensemble Multiplexer
  • AVTMUX with Secure Streaming

OPTIONS
AES67 2-Channels Upgrade
With the AES67 software upgrade, two additional audio channels RX (1 stream) and two additional audio channels TX (1 stream) are optionally available over IP via AES67.
AES67 is the lowest common denominator of several similar technologies and ensures communication between e.g. AES67 compatible Dante and Ravenna devices.

EDI(ETI) + FhG MuxEnc Upgrade
To use the encoders with non-AVT multiplexers, the EDI upgrade is required. The MuxEnc protocol is also required to connect FhG multiplexers.

Dual 19" Mounting Kit
A 19" Dual Mounting Kit is available for the MAGIC AE1 DAB+ Go Audio Encoder, allowing two devices to be mounted side by side in a 19" rack. The standard scope of delivery of the above devices already includes mounting brackets for mounting one device in a 19" rack

External redundant power supply
Optionally, a redundant power supply can be used via an external box.
Coding algorithms: MPEG-4 HE-AAC V2 (FhG Licence)
ETSI TS 102 563
Coding modes: Mono, Mono SBR1
Stereo, Stereo SBR, Stereo SBR PS2
Sampling frequencies: 24, 48-kHz 16, 32-kHz
Data rates: 8-kbit/s ... 192-kbit/s
Audio Interfaces Encoder: XLR, analogue, electr. balanced
Digital AES/EBU with integrated sample rate converter
Audio level: -3 ... 9 dBu
Headroom: adjustable
Synchronisation: NTP, AES/EBU
Line interfaces: LAN(optional EDI(ETI), FhG MuxEnc Protocol)
• unicast, simulcast (2 streams), multicast
Data interfaces: PAD LAN
Data rates up to 115200 Baud
Control interfaces: LAN 10/100 Mbit/s
GPIO 4 x TTL/2 x Relays
Power supply: 12V DC (external power supply)
Frequency: 50/60 Hz
Power consumption: 12 W
Dimensions (H x Wx D): 1U x 1/2 x 19" x 22 cm

Dab Products Brochure