Itel DXVR-3 Digital audio changeover

The DXVR is a Digital audio changeover silence detection and automatic switcher with 3 inputs


1.300,00 Excl. VAT
  To cart »
  Error while adding to cart
Ships in: 1-2 Weeks

MPX Decoder


Itel DXVR 3- Digital audio changeover/WatchDog.


The DXVR is a Digital audio changeover silence detection and automatic switcher.
The MPX signal is decoded into L/R channels by a DSP-based stereo decoder which also provide stereo and RDS subcarriers level metering.
The MPX source is considered valid only if the PI code matches with the one stored internally. The user can determine the switching priority of the various sources and the switching timings and thresholds, using the front panel display or with a dedicated software.
This unit include a passive emergency bypass, so that any input will be bypassed on its respective output, in case of hardware or software failure

Analog audio input


Sampling frequency 48KHz/24bits
Input level 12/-12dBu
XLR connectors, electronically balanced

Digital audio input


accepts AES/EBU and SPDIF sample rates from 32 to 96KHz
XLR connector with balanced transformer.

MPX audio input


0dBu level (2.2Vpp / 775mV RMS 75KHz)
BNC Connector, impedance 10K ohm

Streaming IP audio input


Formats: AACplus, MP3, Ogg Vorbis, G.711, PCM Decoding
IP Streaming via TCP, UDP, RTP, Multicast
USB Flash Memory Interface
Level 12/-12dBu

Audio outputs


Analog level 12/-12dBu
Digital level 0/-12dBu
XLR connector, balanced

Headphones output


1/4" front panel jack
Output: 100mW RMS over 50 ohm

Remote control


All functions can be managed remotely with an included software.


Power supply


100-240VAC 50/60Hz

Physical


1 x 19" rack unit
44mm x 483mm x 156mm
Weight 2Kg
Itel DXVR Brochure