Aphex 320D Audio leveller
The 320D is an audio leveller which can act as two independent mono processors or one linked stereo processor, which is selectable on the front panel. This is true with both analog and digital I/O.
On request
Ships in: Out of production
Aphex 320D COMPELLOR Stereo audio leveller controller.
The 320D can act as two independent mono processors or one linked stereo processor, which is selectable on the front panel. This is true with both analog and digital I/O.
When the analog input is used, the digital output contains the 320D's processing. When the digital input is used, the analog output contains the 320D's processing, properly leveled.
Aphex builds products that last and last without need for repairs or calibration. Some Compellors have literally been in 24-hour use in the same rack for a decade or longer! When you specify a Compellor, you know it will do its job flawlessly and give you peace of mind.
- Delivers transparent audio level control for broadcast, recording and live sound
- Balanced analog input and output
- AES digital input and output
- Dual mono or stereo operation
The 320D's Frequency Discriminate Leveler section, with the Dynamic Verification Gate and the Silence Gate, slowly adjusts the volume level of an audio stream with very complex algorithms that hide its work. It works differently at different frequencies and stops processing when the sound stops, then resumes instantly when the sound reappears, so there's no distracting increases in program background noise. When you listen, you know the levels are made more even, but you don't perceive the levels are shifting.
The 320D's Variable Slope Compressor, Dynamic Recovery Computer and Dynamic Verification Gate add adaptable compression to match the texture of changing audio sources. You don't hear pumping or other audio artifacts, just natural sound that is evenly consistent in loudness.
The 320D's limiter acts on peaks that shoot beyond average program levels so they are easy to handle by any analog or digital recording system.
Applications
- Broadcast pre-processing
- MP3 encoding and playback
- Recording
- Installed and mobile sound
- DAW input
- Mastering
- Satellite uplinks
- Background music
- Ham radio
- Tape duplication
- Cable TV
Audio
Frequency Respons 10Hz - 38 kHz(± 0.5dB)
Dynamic Range 120 dB
Hum and Noise(unweighted 22Hz-22kHz) -93 dBu
Crosstalk(10 Hz - 22kHz) -79 dB
THD(10 Hz - 22kHz at max. output) .0003%
IMD(10 Hz - 22kHz at max. output) .0007%
Input
Connector XLR-3F and 1/4" TRS Phone Jacks
Type Transformerless, active balanced
Balanced 40k ohms
Unbalanced 20k ohms
Maximum Level 27 dBu
CMRR >40 dB
Output
Connector XLR-3M and 1/4" TRS Phone Jacks
Type Active balanced(may be used unbalanced)
Balanced 112 ohms
Unbalanced 56 ohms
Maximum Level 27dBu Unloaded; 25 into 600 ohms
Other Specifications
Power requirements 90-250 VAC 50-60 Hz 12W
Dimensions 19"W x 1.75"H x 8.25" D 1 Rack U(482.6mm x 44.5mm x 209.6mm)
Net Weight 6 lbs(2.73 kg)
Shipping Weight 9 lbs(4.1 kg)
Frequency Respons 10Hz - 38 kHz(± 0.5dB)
Dynamic Range 120 dB
Hum and Noise(unweighted 22Hz-22kHz) -93 dBu
Crosstalk(10 Hz - 22kHz) -79 dB
THD(10 Hz - 22kHz at max. output) .0003%
IMD(10 Hz - 22kHz at max. output) .0007%
Input
Connector XLR-3F and 1/4" TRS Phone Jacks
Type Transformerless, active balanced
Balanced 40k ohms
Unbalanced 20k ohms
Maximum Level 27 dBu
CMRR >40 dB
Output
Connector XLR-3M and 1/4" TRS Phone Jacks
Type Active balanced(may be used unbalanced)
Balanced 112 ohms
Unbalanced 56 ohms
Maximum Level 27dBu Unloaded; 25 into 600 ohms
Other Specifications
Power requirements 90-250 VAC 50-60 Hz 12W
Dimensions 19"W x 1.75"H x 8.25" D 1 Rack U(482.6mm x 44.5mm x 209.6mm)
Net Weight 6 lbs(2.73 kg)
Shipping Weight 9 lbs(4.1 kg)