Deva Broadcast Radio Explorer FM Analyzer

De Deva Broadcast Radio Explorer - Mobile FM Radio Analyzer is een multifunctioneel, gemakkelijk in gebruik voor het controleren van FM uitzendingen. Alle parameters kunnen worden opgeslagen in een logfile.

1.650,00 Excl. BTW
  Naar winkelwagen »
  Fout bij toevoegen
Levertijd: 7 dagen

DEVA Broadcast Radio Explorer - Mobiele FM Radio Analyzer.

Radio Explorer is a multifunctional, easy to use tool, designed to evaluate FM broadcast band congestion and to measure and store all of important radio broadcast parameters in a Log file. This is a stand-alone solution for running surveys - no other additional tools are needed. You can setup for observation up to 50 preselected channels. All you need to do is to get Radio Explorer in the vehicle and go. When your campaign is over just use the supplied free of charge Windows software to convert the log files into KMZ format and visualize the stored data in Google Earth. Thus you can ""get the picture"" of what really happens in the field, to outline the coverage of every station comparing with competitors. Such functionality is irreplaceable when you need to analyze and tune your broadcast equipment and antenna. The Log file can be exported also as transitional format for future analyze or to keep it in record.

With a click on the button Radio Explorer becomes an excellent tool for analyzing and setup of whole broadcast equipment on the site. It can measure RF level, MPX deviation, Left & Right Audio levels, RDS and Pilot injection levels and display the measurements on large, easy to read LCD display. Easy switching between RDS/RBDS standards and measurement units makes Radio Explorer compatible for use by broadcast engineers from all around the world. For even better control and data representation connect the device to a usual Windows PC, via a USB port. You can choose between various bar-graphs, data plots, histograms and etc. A super-fast band scan mode is available and gives to you real-time live visualization of whole FM band or just small part of it with down to 5 kHz resolution. All of device or campaign settings you can do by using software or via very intuitive and sample user interface with 5 buttons and LCD screen.

Radio Explorer incorporates a high quality FM front end with all MPX signal and RDS parameters data logger and high sensitive GPS receiver in reinforced steel box. Additional MPX input is available for monitoring as well as MPX output, left and right ""program output"" and AES/EBU digital audio output. Inputs are for FM and GPS antennas and for power supply. The program received can be monitored with headphones plugged into a standard 1/8"" jack with electronic volume control.


  • FM Band 87,5-108 MHz Basic Spectrum Analyzer
  • Selectable wide/narrow IF bandwidth
  • MPX, PILOT & RDS deviation meters
  • Built-in Stereo decoder Stereo Presence Detection
  • LEFT and RIGHT demodulated audio level meters
  • Built-in 50-channels GPS Receiver
  • Measurement results visualisation in Google Earth
  • Accurate front-panel metering for local use
  • Headphones audio output with volume control
  • RDS and RBDS decoder
  • FM/RDS/RBDS Data Logger
  • RDS/RBDS Stream BER meter
  • Metal Case for high RF immunity
  • Full control and monitoring via USB connection
  • RF and RDS Measurements (real time & average)
  • Very Intuitive Application Interface
Tuning Range 87 to 108 MHz
Tuning Step 50kHz (5 kHz in Band Scan Mode)
Tuner Sensitivity 40 dBµV
Antenna Ports BNC Connector, 50Ω
Antenna Ports Isolation No
Internal Attenuator No
Dynamic range 0 to 90dBµV; 20 dBµV (-87 dBm) for monaural; 43.5 dBµV (-63.5 dBm) for stereo
FM Demod
IF Filter Bandwindth fixed 150 kHz
Frequency Response ±0.5 dB, 10 Hz to 40 kHz
MPX Power No
Dynamic range > 80 dB
Stereo Decoder
Frequency Response (L and R) ±0.5 dB, 20 Hz to 15 kHz; follows selected de-emphasis curve
De-emphasis 50 µs or 75 µs, Selectable
SNR (Stereo) >50 dB, 50 µs de-emphasis
THD <0.3%, 10 Hz to 15 kHz, 50 µs de-emphasis
Separation > 35 dB
Crosstalk > 40 dB
FFT Spectrum Analysis (RF, Composite, Audio)
Signal Sources No
FFT length No
Dynamic range No
Scope Analysis (RF, Composite, Audio)
Signal Sources No
Record length No
Dynamic range No
Metering Accuracy
RF Level ±3dB, 0 to 80dBµV
MPX Power No
Total, Pos, Neg ±3 kHz, 0 to 130 kHz, 0.1 kHz resolution
Pilot, RDS ±0.5 kHz, 0 to 15kHz, 0.1 kHz resolution
Audio ±2 dB, 3.0 to -35.0 dB, 0.1 dB resolution
Audio (L, R) 15 dBm, 600Ω, XLR (on rear panel, adjustable)
AES3 (L, R) 5.0 Vp-p, 110Ω, balanced XLR Connector
Headphone 3,5mm (1/8") Phone Jack
Communication Interfaces
USB B-type Connector
Ethernet 10/100 Base-T No
RDS Decoder
Standards European RDS CENELEC; United States RBDS NRSC
Error Correction & Counting Yes
AF Decoding Yes
CT (Time/Date) Yes
RT (Radio Text), RT Yes
PS (Program Service name) Yes
Group Analyzer Yes
BER Analyzer Yes
Group Sequence Display Yes
RDS RAW Data Display Yes
GPS Receiver
Number of channels 50
Antenna Pre-amplified, 5m of cable, magnetic
Connector SMA, rear panel
Measurement Storage
Storage 2GB Build-in Memory Card
Data format proprietary binary files
Power Requirement
Voltage 12 DC (11-15V) / 2A max at 12V
Connector XLR (on rear panel)
Size and Weight
Dimensions (W;H;D) 216 x 89 x 190 mm
Shipping Weight 470 x 180 x 310 mm / 4.9kg