Pro FM 50 Watt DAB transmitter
Pro FM 50 Watt DAB transmitter with a power of 50 Watts in a 2H rack housing. Perfect for stand alone use, or gapfiller.
€ 2.599,00
Excl. VAT
Ships in: 14 Days
Pro FM 50 Watt DAB transmitter
DAB transmitter with a power of 50 Watts in a 2H rack housing.
And consists of EDABv2+ DAB+ digital radio exciter card and RF amplifier which is specially designed for digital radio.
Equipped with large 4x16 LCD display and LED bargraph meters! Amplifier section is controlled with our new control board. Power is measured using our new directional couplings with True-RMS response, perfect for DAB+ The Large heavy-duty ball-bearing cooling fans to prevent excessive heat. Amplifier is equipped with SWR and temp protection and equipped with PC remote control (possible via USB, RS232 or Ethernet). A robust transmitter made for 24/7/365 use. DAB+ amplifier is controlled and configured via web interface. Audio is provided via ETI stream generated using ODR-DabMUX and input via Ethernet.
What parameters can I change and monitor via PC remote control?
- Power (100 steps)
- Alarms
- Temperature, output power and reflected power, voltage
- You can put the device in standby
- You can monitor current and voltages, two temperatures, output and input power and also reflected power
RF SECTION
- Output power 50 DAB+ typical
- Output impedance 50 unbalanced, VSWR less than 2:1 for full output
- Output connector: N (25W) or 7/16 (400W)
- Frequency range 175-225MHz
- RF Harmonics: Requires DAB+ mask filter to be tuned for your channel to be compatible
- Monitoring Led: Power on, SWR/TEMP warning
- Audio input: Delivered via ETHERNET, a suitable program must be running on a network connected computer
GENERAL
- Mains voltage: 110- 240V 50/60Hz universal, works everywhere on this planet
- Ambient temperature: -5° to +45°C
- External dimensions 1000W (W x D x H) 19" x depth (492mm) x height 2U (88mm)
- Physical weight 10 kg (25 W), 18 kg (400 W)
- Volumetric weight up to 25Kg
SPECIFICATIONS DAB+ exciter:
- Nominal transmission frequency: 176 ... 239 Mhz
- Signal shoulder height: 54 dB (when TX power is 3 dBm).
- Software required: ODR-DabMUX is only required if you need to create an ETI stream yourself
- I/Q samples width: 18 bit
- Complex sample rate: 6144 kS/s.
- Input interface: 10/100 Mbit Ethernet
- Output power 50 DAB+ typical
- Output impedance 50 unbalanced, VSWR less than 2:1 for full output
- Output connector: N (25W) or 7/16 (400W)
- Frequency range 175-225MHz
- RF Harmonics: Requires DAB+ mask filter to be tuned for your channel to be compatible
- Monitoring Led: Power on, SWR/TEMP warning
- Audio input: Delivered via ETHERNET, a suitable program must be running on a network connected computer
GENERAL
- Mains voltage: 110- 240V 50/60Hz universal, works everywhere on this planet
- Ambient temperature: -5° to +45°C
- External dimensions 1000W (W x D x H) 19" x depth (492mm) x height 2U (88mm)
- Physical weight 10 kg (25 W), 18 kg (400 W)
- Volumetric weight up to 25Kg
SPECIFICATIONS DAB+ exciter:
- Nominal transmission frequency: 176 ... 239 Mhz
- Signal shoulder height: 54 dB (when TX power is 3 dBm).
- Software required: ODR-DabMUX is only required if you need to create an ETI stream yourself
- I/Q samples width: 18 bit
- Complex sample rate: 6144 kS/s.
- Input interface: 10/100 Mbit Ethernet
