Description
AXELTECH Oxygen 3000 Plus 16 Faders Digital Broadcast Console
The Oxygen 3000 Plus: is much more than a Digital Broadcast Mixer! A full range of powerful features for Radio On-Air and Production available in 3 different formats and flexible configurations: 8, 12 and 16 faders with 1 or 2 Audio I/O Boards and 16+16 or 32+32 Dante I/O.
Oxygen 3000 Plus is the best-equipped console of its category: Low Latency, Users Preset, Smart Keys, EQ, Compressors, Telephone Hybrid, HDMI Output, Analogue and Digital I/O, USB, Bluetooth, Dante AoIP, Telco, Presenter Talk Box, Streaming In/Out.
The DSP based processing guarantees high-end quality audio and of course you will find the easiness of use that marks all the AxelTech’s products.
Input & Output with 1 Audio I/O Board
- 5 microphone inputs with Automix
- 2 stereo analogue inputs, up to 4 Stereo analogue inputs using other input sources
- 4 stereo analogue outputs
- 1 built-in telephone hybrid or 1 Telco with GPIO
- Up to 4 Telco using other input sources
- 1 Bluetooth audio interface or 1 stereo analogue input
- 1 digital In (AES/EBU) or 1 USB Input (play)
- 1 digital Out (AES/EBU)
- 2 USB audio Input (play)
- 1 USB audio Output (rec)
- 1 Streaming In + 1 Streaming Out
- 16 inputs + 16 outputs or 32 inputs + 32 outputs via Dante (optional) configurable as mono/stereo/telco
Input & Output with 2 Audio I/O Boards
- 10 microphone inputs with Automix
- 4 stereo analogue inputs, up to 8 Stereo analogue inputs using other input sources
- 8 stereo analogue outputs
- 1-2 built-in telephone hybrid or 1-2 Telco with GPIO
- Up to 8 Telco using other input sources
- 1-2 Bluetooth audio interface or 1-2 stereo analogue input
- 1-2 digital In (AES/EBU) or 1-2 USB Input (play)
- 2 digital Out (AES/EBU)
- 4 USB audio Input (play)
- 2 USB audio Output (rec)
- 1 Streaming In + 1 Streaming Out
- 16 inputs + 16 outputs via Dante (optional) configurable as mono/stereo/telco
General
Fully Digital Broadcast Console for Radio Broadcasting with 8, 12 or 16 faders
Knob with A/B Fast source switch or source selection for each fader
4+1 busses (PGM, SUB, Aux1, Aux2, PFL)
Near 0 latency (< 0,7 ms I/O)
Digital Signals Routing 50×50 matrix with direct Input to Output
Assignable Stereo N-1 on any output
Complete Remote Control by means of an application replicating the surface
Remote configuration and maintenance via Web Interface
User-definable Presets & Snapshots
5 bands fully parametric Equalizer on each input
Dynamic Processor with expander and compressor section on each microphone input
Advanced and configurable Monitor Facilities for Control Room and Studio
Customizable RGB colored buttons
7” TFT IPS Graphic Color Display for console configuration
Four 2,2” TFT IPS displays for the output levels monitoring
2,2” TFT IPS displays on top of each fader displaying channel status, levels and source name
HDMI Out for console status display
2 Timers (Ctrl-Room and Studio microphones on HDMI Monitor)
START/ON Buttons for each fader
4 recall Snapshot buttons
4 direct Talkback buttons
RGB led Bar for each fader
Studio & Control Room Monitor Section
8 customizable Smartkey Buttons
2 customizable Function Keys for each fader
TalkBox for guest and presenter (optional)
Redundant PSU (optional)
Built In Decoder and Streamer
Oxygen 3000 Plus, in addition to analog/digital/AoIP inputs and outputs, are open to integration with the IP world, thanks to the ability to decode two audio streams (each stereo or mono) as input and generate an output audio stream (stereo or mono).
Options
- Redundant power supply
Talk Box
Dante I/O board
RJ45 adapters for:
Mic
Line In
Line Out
Telco
GPIOOxygen Remoter Software, which enables up to 8 additional virtual faders for a full I/O control is available on Oxygen 3000 Plus as it is, for free, in any Oxygen Digital Console model.
